7 Reasons Why Your Netgear WiFi Range Extender Not Setting Up

Wi-Fi connecting getting disconnected is a serious and annoying problem, and if you are dealing with it, then you need to find a solution to fix it. The details of how to fix Netgear WiFi Extender not working can be found in the section below. The model used here is Netgear WiFi Extender N300 setup, so if you are using this particular model, then you will get all the info you need here.

With a wide range of Wi-Fi-enabled devices, you must ensure a fast and stable internet connection. But, if you are not getting it, then you must take a look at the reasons and their solutions.

1.       Placement of the router
If your router isn’t placed where it should be, i.e., close to the Wi-Fi Range Extender at the time to Netgear Extender setup, then you can experience issues. There could be a chance that the internet signal will be hindered by other electrical and electronic devices present in the room such as microwave, treadmill, juicer, security alarms, and other such devices.

2.       Distance between your router and extender
Your router and extender must be kept close to each other when you are setting up your extender using www.mywifiext.net link. In case, mywifiext not working, then you can get in touch with experts. The distance between your router and extender should not be more than 20-25 meters. After configuring your extender, you can move it to any other room.

3.       Non-Wi-Fi devices
Interference can be caused by wired and wireless devices that come with a radio transmitter, so make sure to have your router and extender placed far away from devices that can create interference. If possible, turn off your electronic devices when not in use to get rid of discontinuous Wi-Fi connection for sure.

4.       Other wired and wireless devices on your home network
If you are dealing with slow and sluggish Wi-Fi connection at the time of setting up and installation of Netgear Wi-Fi Range Extender, then it could be due to the devices connected on the network. So, make sure to disconnect all the wired and wireless devices connected on the network except your computer or laptop until your extender is being configured.

5.       Interference of other Wi-Fi devices
There is a chance that some devices that aren’t connected to the Wi-Fi network but using radio frequency, such as, cordless phones, Bluetooth devices and so on. If that is the case, then you need to change the frequency band of the Netgear extender setup.

6.       Connection between the router and Wi-Fi Range extender
Make sure to have a strong connection between the router and the extender using an Ethernet cable preferably. If that isn’t possible, then use a Wi-Fi connection to connect both devices.

7.       Check your Ethernet wire/cable
If you’re using an Ethernet cable for having a strong connection between the router and extender, then make sure the cable is in a good condition, or else, the connection will break frequently.
This is how you can fix the problem of Netgear Extender not working. In case, the problem continues to exist, then reach out to Netgear Extender setup experts.

Popular posts from this blog

Instructions On How To Setup Netgear Wifi Extender N300

Can I use WPS method for connecting Range Extender to Route network when the router security is WEP?